Here is my 'silly' question: I changed my Win 10 IP address to a static IP address as it seems that dynamic IPs may change the IP and make my computer no longer communicate with Streamdeck and/or ATEM Mini Pro. Hi there - Whilst being a 'crack' when it comes to content creation, network setting are not my forte. So for example, a gateway IP address of 192.168.1.1 may or may not be correct depending on your local network. If using a Static IP address, you'll want to make sure that you use the gateway IP address and network settings from your router. This could either be due to a hardware-level issue (as described above) or a problem with the router/DHCP server. If DHCP settings report an IP address of 0.0.0.0, that generally means that it could not obtain an IP address from the DHCP server. If you have an Ethernet cable connected and devices at either end of the cable powered on and you don't see any LED activity for that connection at either end, that is a good indication of some kind of problem at the Ethernet layer such as: bad port on the Ethernet switch, bad Ethernet port on the ATEM Mini, or bad network cable. Most Ethernet ports have link status and activity LED indicators, these are often solid indicate if an Ethernet link has been established and start flashing to indicate that there is network activity on the link (colors vary depending on the manufacturer).Įthernet switches have such LEDs and I believe there are LED indicators on the Ethernet port of the ATEM Mini as well.

Qfinder pro static ip